1~2GHz, Main line insertion loss1dB, Coupling20dB, SMA
Coupled detection module
| Parameters | Min | Typical | Max | Units |
| Frequency | 1 | ~ | 2 | GHz |
| Main line insertion loss | 1 | dB | ||
| Power | 20 | ~ | 40 | dBm |
| Coupling | 20 | dB | ||
| Directivity | 20 | dB | ||
| Main line VSWR | 1.5 | |||
| Detection accuracy | 1 | dB |
| Connector | SMA-K |
| Impedance | 50Ω |
| Surface | Conductive oxidation |
| Operation Temp. | -40~+60℃ |
| 脉冲体制 | 单载频脉冲波形1、脉冲宽度:0.3us~2us;2、重复频率:0.1kHz~1kHz |
| 脉冲体制 | 线性调频波形1、脉冲宽度:1us~1000us;2、瞬时带宽:1MHz~50MHz3、重复频率:50Hz~1kHz |
| 连续波体制 | 1、连续波2、三角调频连续波,带宽 50MHz3、相位编码波形,码元宽度 0.02us |
| RF signal description | 频率范围实际上包含了射频信号的带宽,比如信号带宽为 500MHz 时,在 8~18GHz 频段内,载频最小为 7.25GHz,最大为 17.75GHz |
| 端口号 | Name | Socket model | Illustrate |
| X1 | Input RF | SMA-K | |
| X2 | Output RF signal | SMA-K | The output signal is on the same frequency as X1 |
| X3 | Output RF signal | J30J-9ZKP | 直流电源输入、信号波形参数(频率、 脉宽、重频等)输入和功率数值输出 |


| Pin number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| Pin Definition | 485-A | 485-B | +12V | GND | Reserve | Reserve | Reserve | Reserve | Reserve |
| 1 | Clean the surface of the product, do not soak the product in cleaning solution for cleaning. |