LNA
10~1600MHz, Gain30dB, Noise figure1.8dB, P-1dB14dBm, SMA
- DLNA8-0.01-1.6G-1841
- China
- One Year
- +86-19938031308
- sales@com-mw.com, cynthia@com-mw.com
- 3-1-2306, No.37 Jiancai Road, Chenghua Zone, Chengdu
- For qty details, please search in spot products of dianzibuy. Any changes to the contents are not notified. Please confirm again before ordering.
- No restrictions on export to any country
- RoHS: no(Customization Needed for ROHS Compliance)
- The product must not be used for illegal purposes. Any losses caused by illegal use shall be borne by the customer.
Product Details
Main specifications
| Parameters | Min | Typical | Max | Units |
| Frequency | 10 | ~ | 1600 | MHz |
| Gain | 27 | 30 | 33 | dB |
| Gain flatness | ±0.75 | dB | ||
| Noise figure | 1.8 | 2.3 | dB | |
| VSWR | 1.5 | 1.8 | ||
| P-1dB | 14 | 16 | dBm | |
| Max input power | 10 | dBm | ||
| Spur reduction | 60 | dBc |
Other parameters
| Connector | SMA-K detachable, Pin 0.38mm |
| Connector material | Stainless steel |
| Impedance | 50Ω |
| Surface | White |
| Working voltage | +12V |
| Working current | 300mA |
| Reverse isolation | 45dB |
| Operation Temp. | -40~+70℃ Design assurance |
Reference picture
Configuration(mm)
Note
Store in an environment with a humidity of less than 25% and pay attention to dust and static electricity prevention.
If the amplifier is directly connected to the antenna, electrostatic protection or limiter protection should be applied.