LNA
Frequency0.2~40GHz, Gain25dB, Noise figure5dB, P-1dB output power8dBm
- DLNA8-0.2-40G-3185
- China
- One Year
- +86-19938031308
- sales@com-mw.com, cynthia@com-mw.com
- 3-1-2306, No.37 Jiancai Road, Chenghua Zone, Chengdu
- For qty details, please search in spot products of dianzibuy. Any changes to the contents are not notified. Please confirm again before ordering.
- No restrictions on export to any country
- RoHS: no(Customization Needed for ROHS Compliance)
- The product must not be used for illegal purposes. Any losses caused by illegal use shall be borne by the customer.
Product Details
Main specifications
| Parameters | Min | Typical | Max | Units | Units |
| Frequency | 0.2 | ~ | 40 | GHz | |
| Gain | 25 | dB | |||
| Gain flatness | ±1 | dB | Any 1.2GHz | ||
| Gain consistency | 2 | dB | |||
| Noise figure | 5 | dB | |||
| VSWR | 2.5 | ||||
| P-1dB output power | 8 | dBm |
Product Application
| Connector | 2.92-K |
| Connector material | Stainless steel |
| Impedance | 50Ω |
| Surface | Conductive oxidation |
| Operation Temp. | -20~+60℃ Design assurance |
| Characteristic | Dual power supply mode selectable |
| Other | Module power supply+12V |
Instructions for use
| 1 | Power supply method 1 | DC power +12~+15V |
| 2 | Power supply method 2 | AC 220V power supply (optional) |
| 2 | Shell Material | Shell aluminum material |
| 3 | Instructions for using the power switch | The switch defaults to neutral to achieve frequency band switching function. |
Parts list
| 1 | Optional | Power adapter( 2A, 12V ) |
| 2 | Optional | AC power cord |
Configuration(mm)
Note
| 1 | Clean the surface of the product, do not soak the product in cleaning solution for cleaning. |
| 2 | If the temperature is higher than 125℃, consult with us before ordering. |
| 3 | Pay attention to electrostatic protection. |